Best resin 3D printers under €230
Updated 22 May 2026 · Live prices on every page load from Germany marketplaces
Ranked off live Germany marketplaces prices plus the specs that actually matter on a resin machine: XY pixel size (finer is better), build volume, and light-source technology. Bigger numbers don't always mean better prints - but they do mean more headroom for miniatures, dental work and jewellery casting. Resin is messier than FDM; expect to spend time on wash, cure and nitrile gloves.
No verified resin printers are listed under €230 on Germany marketplaces right now.
No listings match your current marketplace selection - tick more sources above.
Matt's take on this budget
Sub-€230 resin is Elegoo Mars Mini and near-clones. Perfectly good for miniatures, pocket parts, keychains - anything where 6K or 8K over a 75 mm-wide bed is enough. The real cost at this tier isn't the printer, it's the workflow: wash-and-cure station, nitrile gloves, IPA, ventilation. Budget two-thirds the printer price again on supporting kit or you'll give up by the third print.
Frequently asked
Is a resin printer under €230 worth buying? +
For tabletop minis at 28 mm or 32 mm scale, absolutely. An 8K Mars Mini prints crisper figures than any FDM at any price. Just remember the workflow cost - a wash-and-cure station, IPA and nitrile gloves add a meaningful chunk on top.
How often do I replace the screen on a sub-€230 resin printer? +
Roughly every 1500-2500 print hours. Replacement screens are typically a quarter to a third of the printer price. Factor that in if you plan to run the printer heavily.
Do I need ventilation for resin printing? +
Yes, genuinely. Resin fumes are an irritant and some formulations are sensitisers - the smell is not background noise to ignore. Print in a garage, shed or near a window with a fan. A sealed cover with activated-carbon filter helps.
Related reading
Ranking is driven by the spec sheet plus live price. Print quality on resin also depends heavily on the slicer, the resin itself, exposure tuning and post-processing - none of which are on the spec sheet. Treat this as a shortlist, read owner reports, then buy.
