E2 - Features IDEX
Updated 21 May 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.com - $2999.00 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ 300°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Over $1,500 - you are paying for polish and ecosystem, not raw capability. Cheaper machines match the hardware on paper.
Head-to-head spec + price table against the Raise3D E2 - Features IDEX. Verified printers on this marketplace only.
At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($2999). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 Raise3D E2 Desktop 3D Printer - Features IDEX (Independent Dual Extruders), Auto Bed Leveling, Video-Assisted Offset Calibration, Power Loss Recovery, Filament Run-Out SensorsAmazon.com · New$2999.00View
Close alternatives - what $2999 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 46.7 L. You'd give up: 300°C hot end vs 290°C.
Get: 27.6 L more build volume (46.7 L) · CoreXY motion - faster, more rigid.
Modest upgrade on the spec sheet.
Frequently asked
What materials can the Raise3D E2 - Features IDEX print? +
At $2999 the Raise3D E2 - Features IDEX has the hot end for engineering materials (300°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.
How fast is the Raise3D E2 - Features IDEX? +
Advertised at 150 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the Raise3D E2 - Features IDEX? +
330×240×240 mm (19.0 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the Raise3D E2 - Features IDEX have auto-levelling? +
Yes - Mesh-leveling with Flatness De auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the Raise3D E2 - Features IDEX worth $2999? +
$2999+ is prosumer/workshop money. Diminishing returns on print quality versus a $700-1000 machine; real returns on long-term reliability, support contracts and replacement parts. Worth it if the printer makes you money, overkill if it is a weekend hobby.
