K2 Plus

$996.54 cheapest of 8 live offers

Updated 18 September 2026 · Live prices on every page load from Amazon US + UK

Buy on Amazon.com - $996.54 →

Affiliate link. Price live from the marketplace, not cached.

At a glance

Technology FDM

Build volume 350×350×350 mm (42.9 L)

Min layer height 50 µm

Kinematics Cartesian

Max print speed 600 mm/s

Max hot-end temp 350 °C

Max bed temp 120 °C

Max chamber temp 60 °C

Nozzle diameter 0.4 mm

Extruders 1

Enclosure Closed

Auto-levelling Automatic leveling

Frame Cast aluminum

Features Wi-Fi, Touchscreen, Camera

What it gets right

✓ 350°C hot end - handles carbon-fibre nylons and PC, not just the easy stuff.
✓ 42.9 L build volume - room for helmets, large functional parts, bulk runs.

Where it falls short

! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.

Compare this with another printer

Head-to-head spec + price table against the Creality K2 Plus. Verified printers on this marketplace only.

Who this is for

Buying your first printer

At this price you're well past the sweet spot for a first printer. There's no shame in starting with something cheaper - you'll learn more on a 200-400 machine and have money left for filament.

Upgrading from an Ender or old Prusa

Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.

Workshop or small business

No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.

Verdicts are rule-driven from the spec sheet and current price ($997). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.

Live offers

Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.

🇺🇸

Creality K2 Plus 3D Printer, Support Multi Color Printing Needs CFS Bundle with 3D Printer Filament 1.75mm 4KG, Black White Blue Red

Amazon.com · New

$996.54
View
🇺🇸

Creality K2 Plus 3D Printer, Support Multi Color Printing Needs CFS Bundle with 2kg Black & White PLA 1.75mm Filament

Amazon.com · New

$998.12
View
🇺🇸

Creality K2 Plus 3D Printer, Support Multi Color Printing Needs CFS, Bundle with Hyper RFID PLA Filament 1.75mm 4KG,Black

Amazon.com · New

$998.19
View
🇺🇸

Creality K2 Plus 3D Printer, Support Multi Color Printing Needs CFS Bundle with Creality 3D Printer Rainbow Filament 1.75mm

Amazon.com · New

$1000.57
View
🇺🇸

Creality K2 Plus 3D Printer, Support Multi Color Printing Needs CFS,Bundle with Hyper RFID PLA Filament 1.75mm, Black

Amazon.com · New

$1002.53
View
🇺🇸

Creality K2 Plus 3D Printer, Support Multi Color Printing Needs CFS,Bundle with Space Pi X4 Filament Dryer Box

Amazon.com · New

$1007.45
View
🇺🇸

Comgrow CFS Filament Management System (Without Filaments) and Creality K2 Plus 3D Printer

Amazon.com · New

$1191.63
View
🇺🇸

Creality K2 Plus 3D Printer, Bundle with Creality CFS, 600mm/s Max High-Speed Printing, Dual AI Camera, Fully Assembled Auto Leveling, 350x350x350mm Large Print Volume, for Pros & Hobbyists

Amazon.com · New

$1305.30
View

Close alternatives - what $997 gets you elsewhere

Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.

Spend less

IdeaFormer-3D

IdeaFormer-3D IR3 V2 Conveyor Belt

$939 (-$58)

Save the money, similar specs on paper. You'd give up: 42.9 L vs 15.6 L build volume, 350°C hot end vs 290°C.

Get: 8.8 L more build volume (51.7 L) · 370°C hot end (was 350°C).

Get: 8.8 L more build volume (51.7 L) · 370°C hot end (was 350°C).

Open page →

Frequently asked

What materials can the Creality K2 Plus print? +

At $997 the Creality K2 Plus has the hot end for engineering materials (350°C) but no active chamber, so ABS and nylon will warp on anything larger than a phone case. Treat it as a PLA/PETG/TPU workhorse with headroom for the occasional small ABS part.

How fast is the Creality K2 Plus? +

Advertised at 600 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.

How big can I print on the Creality K2 Plus? +

350×350×350 mm (42.9 L). Big enough for helmets in one piece, full-scale cosplay props, or multiple medium parts in one run. Reliability starts mattering at this scale - a failed 20-hour print stings.

Does the Creality K2 Plus have auto-levelling? +

Yes - Automatic leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.

Is the Creality K2 Plus worth $997? +

$997 is serious hobbyist territory. For the Creality K2 Plus to justify this over a $500 machine it needs to deliver genuine speed (volumetric flow), reliability at speed, or access to engineering materials. Check the spec table above against those three.

Long readFDM vs resin 3D printingWhen each process wins, where each fails, and why most beginners should start with FDM.Read →Long readValue Score explainedHow I rank every listing - build volume, volumetric flow, kinematics, auto-levelling, not just price.Read →

Prices are live from the marketplace and refresh on every page load. I earn a small commission on purchases made through the affiliate links above - it costs you nothing and keeps the data-gathering running. I never accept free hardware.

At a glance

What this printer gets right and wrong

Live offers

Close alternatives - what $997 gets you elsewhere

Frequently asked

Related reading