TINA2 Plus
Updated 21 May 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.com - $218.49 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under $300 - low-risk way to get into 3D printing without regretting the spend.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! Max hot-end temp only 245°C - PLA-dominant territory, no PETG with any safety margin.
Head-to-head spec + price table against the HEPHI3D TINA2 Plus. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($218). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 TINA2 Plus 3D Printer with WiFi Cloud, HEPHI3D DIY 3D Printers 250mm/s High Speed, Auto Leveling Mini 3D Printer for Beginners and Kids, Fully Assembly 3D Printers Open Source for Home, Office, SchoolAmazon.com · Used$218.49View
- 🇺🇸 TINA2 Plus 3D Printer with WiFi Cloud, HEPHI3D DIY 3D Printers 250mm/s High Speed, Auto Leveling Mini 3D Printer for Beginners and Kids, Fully Assembly 3D Printers Open Source for Home, Office, SchoolAmazon.com · New$229.99View
- 🇺🇸 TINA2 Plus 3D Printer with WiFi Cloud, HEPHI3D DIY 3D Printers 250mm/s High Speed, Auto Leveling Mini 3D Printer for Beginners and Kids, Fully Assembly 3D Printers Open Source for Home, Office, SchoolAmazon.com · New$229.99View
Close alternatives - what $218 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, similar specs on paper. You'd give up: 12.8 L vs 0.0 L build volume, 245°C hot end vs undefined°C.
Get: 250°C hot end (was 245°C).
Get: 300°C hot end (was 245°C) · CoreXY motion - faster, more rigid.
Frequently asked
What materials can the HEPHI3D TINA2 Plus print? +
At $218 the HEPHI3D TINA2 Plus realistically prints PLA and TPU. The 245°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How fast is the HEPHI3D TINA2 Plus? +
Advertised at 150 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the HEPHI3D TINA2 Plus? +
210×210×290 mm (12.8 L). Comfortable for medium props, functional parts up to ~25 cm, and batch printing. One of the most-used working sizes in hobby 3D printing.
Does the HEPHI3D TINA2 Plus have auto-levelling? +
Yes - Auto bed leveling auto-levelling probe. Not quite as clean as load-cell or LiDAR, but reliable once calibrated and a world better than manual paper-under-the-nozzle.
Is the HEPHI3D TINA2 Plus worth $218? +
$218 is the sweet spot tier. The HEPHI3D TINA2 Plus competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
