900-0115A Sketch PLA Filament
Updated 21 May 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.com - $299.99 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under $300 - low-risk way to get into 3D printing without regretting the spend.
- ! Bedslinger design - expect ringing artefacts on tall prints at speed.
- ! 3.4 L build volume - fine for calibration prints and small parts, awkward for anything bigger than a mug.
Head-to-head spec + price table against the MakerBot 900-0115A Sketch PLA Filament. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($300). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 MakerBot 900-0115A Sketch PLA Filament for Sketch Classroom and Sketch Large 3D Printers (2.2 lb, 10-Pack)Amazon.com · New$299.99View
- 🇺🇸 MakerBot Sketch Single-Printer Setup 3D Printer with Cloud Printing File Management Software for One Teacher and Five StudentsAmazon.com · New$800.00View
- 🇺🇸 MakerBot Sketch 3D Printer with Fused Deposition Modelling Print Technology and Layer Resolution of 100 to 400 Microns (Black, Large)Amazon.com · Used$1380.00View
- 🇺🇸 MakerBot Sketch Sprint 3D Printer with 250 mm Per Second Print Speed, Includes UltiMaker Digital Factory Cloud Cura Software and Certification Program, Plastic Filament, 15.8 x 17.8 x 18.3 inchesAmazon.com · New$1699.99View
Close alternatives - what $300 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 11.6 L. You'd give up: nothing obvious on the spec sheet.
Get: 7.3 L more build volume (10.6 L) · 300°C hot end (was —°C).
Get: 68.6 L more build volume (72.0 L) · 260°C hot end (was —°C).
Frequently asked
What materials can the MakerBot 900-0115A Sketch PLA Filament print? +
At $300 the MakerBot 900-0115A Sketch PLA Filament realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
How big can I print on the MakerBot 900-0115A Sketch PLA Filament? +
150×150×150 mm (3.4 L). Small build area. Fine for calibration prints, minis, keychains, small functional parts. Awkward for anything bigger than a coffee mug.
Is the MakerBot 900-0115A Sketch PLA Filament worth $300? +
$300 is the sweet spot tier. The MakerBot 900-0115A Sketch PLA Filament competes directly with the current Bambu A1, Creality K1 and Prusa Mini generation. Hardware-per-pound is tight here - the differentiator is usually software polish and ecosystem.
