TINA2S
Updated 21 May 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.com - $180.94 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under $300 - low-risk way to get into 3D printing without regretting the spend.
- ! Open frame - PLA and PETG only, realistically. Forget ABS or nylon done properly.
- ! 1.4 L build volume - fine for calibration prints and small parts, awkward for anything bigger than a mug.
Head-to-head spec + price table against the WEEDO TINA2S. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($181). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 TINA2S 3D Printer for Kids and Beginners, WEEDO Mini 3D Printer with Fully Assembled and Auto Leveling, WiFi & App Control, Open Source Firmware, Filament Detection Sensor Work with PLA/PLA+/TPUAmazon.com · New$180.94View
- 🇺🇸 TINA2S 3D Printer for Kids and Beginners, WEEDO Mini 3D Printer with Fully Assembled and Auto Leveling, WiFi & App Control, Open Source Firmware, Filament Detection Sensor Work with PLA/PLA+/TPUAmazon.com · Used$180.94View
- 🇺🇸 TINA2S 3D Printer with WiFi Printing, WEEDO Mini 3D Printers for Kids and Beginners, Auto Leveling and Fully Assembled FDM 3D Printer, Open Source DIY 3D Printer for Home Classroom and OfficeAmazon.com · New$229.99View
Close alternatives - what $181 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 3.4 L. You'd give up: 260°C hot end vs undefined°C.
Get: 30.1 L more build volume (31.5 L) · 300°C hot end (was 260°C).
Get: 4.4 L more build volume (5.8 L).
Frequently asked
What materials can the WEEDO TINA2S print? +
At $181 the WEEDO TINA2S is a PLA, PETG, TPU machine. The 260°C hot end covers PETG with a small safety margin. ABS and nylon need an enclosure plus more heat - not this printer.
How fast is the WEEDO TINA2S? +
Advertised at 100 mm/s, but that is motion-system capability, not what the hot end can sustain. Expect real-world prints at 80-150 mm/s without quality collapse.
How big can I print on the WEEDO TINA2S? +
120×120×100 mm (1.4 L). Small build area. Fine for calibration prints, minis, keychains, small functional parts. Awkward for anything bigger than a coffee mug.
Is the WEEDO TINA2S worth $181? +
At $181 the WEEDO TINA2S is in hobby-entry territory - low-risk way to try the hobby. Expect older motion systems and basic feature sets, but print quality will surprise people coming from five-year-old reviews.
