Small
Updated 21 May 2026 · Live prices on every page load from Amazon US + UK
Buy on Amazon.com - $140.90 →Affiliate link. Price live from the marketplace, not cached.
At a glance
What this printer gets right and wrong
- ✓ Under $300 - low-risk way to get into 3D printing without regretting the spend.
- ! Nothing stands out as a clear weakness on the spec sheet - but spec sheets never capture firmware polish, customer support or long-term reliability. Read owner reports before committing.
Head-to-head spec + price table against the LICAEVEY Small. Verified printers on this marketplace only.
Sensible first-printer territory: priced where you can afford to get it wrong, with auto-levelling so the first layer isn't a ritual. You'll outgrow it in 18 months, which is fine.
Bedslinger with middling flow rate - you already have one of these. The whole point of upgrading is speed, rigidity, or print quality that your current machine can't hit. This doesn't clear that bar.
No active heated chamber or a hot end that tops out below 280°C means no reliable ABS, ASA, nylon or PC. Fine for a hobbyist, wrong tool for commercial work in engineering materials.
Verdicts are rule-driven from the spec sheet and current price ($141). They don't capture firmware polish, support quality, or reliability - so treat them as a sanity check, not a final answer.
Live offers
Every live listing on the English-language Amazon marketplaces that I've matched to this printer. Cheapest first. Affiliate links.
- 🇺🇸 Small 3D Printer for Beginner, Frequency Division Multiplexing 3D Printer, High Accuracy Rapid Heating and Printing Compact 3D Printing Machine for Education (US Plug)Amazon.com · New$140.90View
- 🇺🇸 Small 3D Printer for Beginner, Frequency Division Multiplexing 3D Printer, High Accuracy Rapid Heating and Printing Compact 3D Printing Machine for Education (US Plug)Amazon.com · New$153.51View
Close alternatives - what $141 gets you elsewhere
Think of this like the shopping-cart upsell: here's what a tenner more or less could buy you in roughly the same category. Same FDM tech, same marketplace, all prices live. Stretches are data-driven; they're not sponsored placements.
Save the money, same build volume at 1.0 L. You'd give up: nothing obvious on the spec sheet.
Get: 10.0 L more build volume (10.0 L) · 250°C hot end (was —°C).
Get: 1.7 L more build volume (1.7 L) · 230°C hot end (was —°C).
Frequently asked
What materials can the LICAEVEY Small print? +
At $141 the LICAEVEY Small realistically prints PLA and TPU. The listed°C hot end is too tight for PETG with confidence and rules out ABS/nylon entirely.
Is the LICAEVEY Small worth $141? +
At $141 the LICAEVEY Small is in hobby-entry territory - low-risk way to try the hobby. Expect older motion systems and basic feature sets, but print quality will surprise people coming from five-year-old reviews.
